- Competition Systems Ltd -

Home | Aftermarket | Engineering Solutions | Competition Systems

Sensors & Systems / Speed & RPM

Position

Accelerometer & Gyro

Temperature

Pressure

Strain

Speed & RPM

Gear Change

Switches & Relays

Wiring & Connectors

The Competition Systems product range of speed & RPM sensors have all been thoroughly tested under the demanding environments of motor sport, many of which are created purely for us and built to our own specification by specialist companies who are leaders in their specific technology.

SEN range of automotive inductive crank sensors - A range of cost effective inductive sensors for speed detection of ferrous toothed wheels. Features include a PA 6.6 GFR case, silicon extension lead and moulded 2 / 3 pin Minitimer connection. Data sheet - SEN Range
Bosch Hall sensor - Rugged automotive Hall Effect switch with an ABS moulded plastic enclosure and fully sealed electronics. Suitable for all applications from wheel speed to engine phase position. Data sheet - Bosch hall sensor
F3 Dallara wheel speed bracket - Standard mounting bracket to suit the Dallara F3 front hub to suit the Bosch wheel speed sensor. Kit consists of 2 brackets which are 'handed' for left and right use.
Air speed 'Pitot' sensor - This system combines an aerospace Pitot tube with an integrated 50mbar differential pressure sensors to provide a 0-5 Volt output relative to air speed between 50 and 330kmh (approx). Calculations for speed output in m/sec are created using the formulas given on the data sheet below. Data sheet - Air speed

Aftermarket | Engineering Solutions
Competition Systems