|
Differential
pressure - High quality differential pressure sensor in a
machined aluminium enclosure with 2 x 2mm diameter push on fittings.
Ideally
suited to air flow applications.
All
sensors provide a linear output relative to difference in pressure
and are supplied with a unique calibration certificate.
Data
sheet - Differential pressure sensors |
 |
APS
Air Pressure Sensor - The APS series devices are high-accuracy and
reliability analogue absolute pressure sensors.
Each
pressure sensor exploits the piezoresistive properties of silicon
devices. The sensing element is a Wheatstone bridge located on a
mechanically-shaped silicon chip. A thick film hybrid circuit for signal
amplifying is included in the same package. The same circuitry provides
thermal compensation and noise reduction.
These
active devices are housed in hermetically sealed plastic protective
casings
Data
sheet - APS Air pressure sensors |
 |
PRT Air Pressure Sensor - The PRT xx series devices are
high-accuracy and reliability analogue absolute pressure sensors.
Each
pressure sensor exploits the piezoresistive properties of silicon
devices. The sensing element is a Wheatstone bridge located on a
mechanically-shaped silicon chip. A thick film hybrid circuit for
signal amplifying is included in the same package. The same circuitry
provides thermal compensation and noise reduction.
These
active devices are housed in hermetically sealed plastic protective
casings
Data
sheet - PRT Air pressure sensor |
 |
|
General
purpose pressure - High volume 10 bar pressure sensor with a
0-5v linear housed in a stainless steel casing with integral 3 way
Packard connector.
Ideally
suited to monitoring applications where measurement trace-ability is
not essential.
All
sensors are ‘pin for pin’ electrically & mechanically
compatible with the Kavliko range of Magneti Marelli race
specification sensors, making them suitable as replacements for
existing installations.
Data
sheet - CS10-LC pressure sensor |
 |
Standard
pressure sensor - Lower cost, high quality range of standard 0-5v
linear output pressure transducers housed in a stainless steel casing.
Ideally
suited to monitoring applications where measurement trace-ability is
not essential.
All
sensors are ‘pin for pin’ and physically interchangeable with the
MMCS professional range of pressure sensors using the same 3/8 UNF
–3 fitting.
Data
sheet - Pressure sensor / Standard |
 |
Reference pressure
sensor -This range of pressure sensors has been created to
operate in the harshest of environments. All ‘gauge’ sensors are
supplied as ‘sealed gauge’ units to isolate them from
environmental contamination, and are compatible with the MM range of
capture modules using a 5V excitation and linear outputs.
Each sensor is
supplied with a unique calibration reference document
Data
sheet - Pressure sensor / reference |
 |
Miniature
Reference pressure
sensor - This range of pressure sensors has been
created to operate in the harshest of environments where limited space
or weight is a limiting factor.
All ‘gauge’
sensors are supplied as ‘sealed gauge’ units to isolate them from
environmental contamination, and are compatible with the MM range of
capture modules using a 5V excitation and linear outputs.
Each sensor is
supplied with a unique calibration reference document
Data
sheet - Pressure sensor / reference miniature |
 |
